ABS/PA-765特性备注：1/16” UL94V-0，1/10”5VA，高流动性。重要参数：熔体流动速率:5.2g/10min,密度:1.2g/cm3,缺口冲击强度:20,拉伸强度:38MPa,断裂伸长率:15%。
ABS/PA-765A特性备注：1/12” UL94V-0，1/10”5VA，高流动性。重要参数：熔体流动速率:4.8g/10min,密度:1.17/cm3,缺口冲击强度:21拉伸强度:39MPa,断裂伸长率:15%。
ABS/PA-765B特性备注：1/10” UL94V-0，1/16”V2，1/8”5VA，中冲击强度。重要参数：熔体流动速率:2.6g/10min,密度:1.16g/cm3缺口冲击强度:24,拉伸强度:39MPa,断裂伸长率:25%
ABS/PA-777B特性备注：耐热性、高冲击强度。重要参数：熔体流动速率:6.7g/10min,密度:1.03g/cm3,缺口冲击强度:23,拉伸强度:42MPa断裂伸长率:15%。
Propiedat ABS/PA-765: 1/16 "UL94V-0, 1/10" 5VA, alto liquidity. importante parametri: Melt flow rate: 5.2g/10min, density: 1.2g/cm3, notch impact strength: 20, tensile strength: 38MPa, elongation at break: 15%.
ABS/PA-765A propiedat: 1/12 "UL94V-0, 1/10" 5VA, alto likviditate. importante parametri: melt flow rate: 4.8g/10min, density: 1.17/cm3, notch impact strength: 21, tensile strength: 39MPa, elongation at break: 15%.
ABS/PA-765B karakteristico note: 1/10 "UL94V-0, 1/16" V2, 1/8 "5VA, medio impact strength. importante parametri: Melt flow rate: 2.6g/10min, density: 1.16g/cm3, notch impact strength: 24, tensile strength: 39MPa, elongation at break: 25%
Characteristics ABS/PA-777B importante parametri: Melt flow rate: 6.7g/10min, density: 1.03g/cm3, notch impact strength: 23, tensile strength: 42MPa, elongation at break: 15%.
nya ana ɛne Tokyo-765 Anapaasa saɛkyerɛ: 1 ɛne 16 kenaduru 94ɛw- 0, 1 ɛne 10 daw5Kensa, fomowoyMillwotu. sɛm antbo anidẽsa: Seeɛdi ɛyɛ euro: 5.2Waɛne 10wɔma, ɛw: 1.2Waɛne esoSus3, tia mmara bio mfin: 20, nguwomɛfiri mfin: 38orbr, ton NE odada be: 15%.
nya ana ɛne Tokyo-765aboAnapaasa saɛkyerɛ: 1 ɛne 12 kenaduru 94ɛw- 0, 1 ɛne 10 daw5Kensa, fomowoyMillwotu. sɛm antbo anidẽsa: baabi saɛyɛ euro: 4.8Waɛne 10wɔma, ɛw: 1.17 ɛne esoSus3, tia mmara bio mfin: 21, nguwomɛfiri mfin: 39orbr, ton NE odada be: 15%.
